ΕΛ Request a quote

Artwork guide

How to set up a file that prints sharp and cuts in the right place. If any of this is new to you, send what you have: we check every file and fix small problems before printing.

Designing with ChatGPT, Claude or Gemini?Give your AI our print spec. It prepares the file with cut lines, white ink and gloss the way our printers need it.

File types

Vector files print sharpest at any size: PDF, AI, CorelDRAW (CDR), SVG or DXF. Convert text to outlines (curves in CorelDRAW), or embed the fonts in the PDF.

Images can be PNG, JPG, TIFF or WEBP. Save EPS files as PDF before sending.

No file? A clear photo of a logo or a sketch with the main sizes is enough to quote. We can trace logos and redraw simple artwork.

Size and resolution

Set the document to the final size in millimetres.

Images need 300 dpi at the final size for stickers, labels, signs and objects. Banners seen from a distance need 100 to 150 dpi at full size.

Keep text and thin lines a sensible size: lines thinner than 0.25 mm and text below about 6 pt can break up on small stickers.

Colour

Send CMYK where you can. RGB files are converted when printed, and bright screen colours can look duller on vinyl.

For neutral greys, use black only, for example C0 M0 Y0 K50. Greys mixed from all four inks can print with a colour cast.

If a colour must match exactly, tell us the Pantone reference and we'll match it as closely as the inks allow.

Cut lines (CutContour)

For stickers, labels and lettering, draw the cut line as a thin, unfilled, closed path in a spot colour named CutContour. We use 100% magenta for it so it's easy to see.

In CorelDRAW or Illustrator, add CutContour, RDG_WHITE and RDG_Gloss as spot colours in a custom palette, named exactly like this.

Keep each cut line as one closed shape and avoid very sharp inside corners and tiny details: the blade rounds them off.

No cut line? We add one around your outline, usually with a 1 to 2 mm white border.

Bleed and safe area

Extend the background 2 mm past the cut line (bleed), so there is no white edge if the cut moves slightly.

Keep text and logos 2 mm inside the cut line (safe area).

White and gloss

On clear and dark materials we print white under the colours. We prepare the white layer for you, or you can set it yourself as a spot colour named RDG_WHITE.

Gloss works the same way, with a spot colour named RDG_Gloss on the parts you want varnished or raised.

Tell us in your request where you want white or gloss and we'll set it up.

Updated:

Send your artwork, get a quote within 24 hours or less

Upload the file, the size and the quantity. We check every file ourselves and reply with a clear, itemised quote.

Request a quote